The China Instrument and Control Society published the results of its 2025–2026 Fellow selection for public comment on October 26, 2026. The public notice period runs from October 26 to November 1, 2026. The selection recognizes professionals who have made outstanding contributions to instrumentation, measurement and control.
Those named include Liu Shiyuan of Huazhong University of Science and Technology, Du Wenli of East China University of Science and Technology, and Lin Jun of Jilin University, alongside other experts and scholars.
The public notice period is an important distinction when interpreting the announcement: the published names represent the selection results under public review. Readers following individual appointments should distinguish this stage from any subsequent confirmation by the society.
For the instrumentation and measurement and control community, the announcement primarily concerns professional recognition. It may draw attention to the contributions of the selected specialists and their institutions, but it does not by itself establish changes in research funding, technology adoption or commercial demand. Any wider effects would depend on subsequent activities connected with their work.
The next relevant information to follow is any further notice from the society concerning the outcome of the public comment period and confirmation of the selection results. That would provide a firmer basis for describing the final Fellow appointments.
Chat Online
Xinyi Instrument supplies pressure transmitters for process control, hydraulic systems, petrochemical plants, water treatment, HVAC, power generation and general industrial pressure monitoring. Our pressure transmitter range covers gauge pressure, absolute pressure, differential pressure, high temperature media and digital communication applications.
Choose from compact pressure transmitters, smart 3051 differential pressure transmitters, diaphragm seal models, RS485 digital pressure transmitters and high frequency dynamic pressure sensors. Standard outputs include 4-20 mA, voltage output, HART and RS485 Modbus options, with stainless steel wetted parts and custom process connections available on request.
| Pressure Types | Gauge, absolute, negative pressure, differential pressure |
|---|---|
| Measuring Range | From low differential pressure to high pressure ranges up to 100 MPa, depending on model |
| Output Signals | 4-20 mA, 0-5 V, 1-5 V, 0-10 V, RS485 Modbus, HART options |
| Accuracy | Typical options include 0.1%, 0.2%, 0.25% and 0.5% FS |
| Process Connection | M20 x 1.5, G1/4, G1/2, NPT and customized thread connections |
| Wetted Materials | Stainless steel, 316L diaphragm and corrosion-resistant sealing options |
| Media | Water, oil, gas, air, steam and compatible liquid or gas media |
| Applications | Pipeline pressure, tank level, flow differential pressure, hydraulic pressure and automation systems |
A pressure transmitter converts the pressure of liquid, gas or steam into a standard electrical signal for PLC, DCS, recorder or control instrument input. It is widely used for pipeline pressure, tank level, flow measurement and process safety monitoring.
Confirm the pressure range, pressure type, medium, temperature, output signal, accuracy, installation thread, electrical connection and environmental requirements. For corrosive media, high temperature or sanitary applications, diaphragm material and sealing structure are especially important.
Gauge pressure transmitters measure pressure relative to atmospheric pressure. Absolute pressure transmitters measure pressure relative to vacuum. Differential pressure transmitters measure the pressure difference between two points and are commonly used for flow, filter and level measurement.
Yes. Xinyi Instrument can support customized pressure ranges, process connections, output signals, cable length, display options and model selection for different industrial applications.